Ever wondered why some buildings stay bone-dry while others can’t beat the leak? Choosing the right membrane waterproofing supplier makes all the difference—yet with so many factories and manufacturers out there, it’s easy to feel overwhelmed. The truth is, a top-notch supplier isn’t just about quality products; it’s about peace of mind, reliable service, and lasting protection for your projects. Curious which factories truly deliver? Dive in to discover the industry’s best and make your next project leak-proof!

Related Video

Waterproofing Membrane Products – LATICRETE

Foundation Waterproofing Membrane | MEL-ROL Self-Adhering Protection …

Product Details:
MEL-ROL is a flexible, bituminous, roll-type, self-adhering waterproofing membrane composed of a 56 mil polymeric waterproofing layer and a 4 mil cross-laminated polyethylene carrier film, laminated under strict quality control. It features exposed polymeric membrane strips for positive overlap adhesion and is available in standard, low, and extra-low temperature formulations. The system is complemented by W. R. MEADOWS accessory products for comprehensive waterproofing solutions.

Technical Parameters:
– 60 mil total thickness (56 mil waterproofing membrane + 4 mil polyethylene
– Roll dimensions: 38.5″ (977.9 mm) wide x 62.5′ (19.1 m) long; gross coverage
– Available in standard, low-temp (20°F to 60°F, -7°C to 16°C), and
– Meets A.R.E.M.A. Specifications Chapter 29, Waterproofing; LARR Report 26022

Application Scenarios:
– Waterproofing foundations, vertical walls, and below-grade floors in
– Between-the-slab waterproofing on plaza decks, parking decks, and structural
– Isolation for mechanical/electronic rooms, laboratories, kitchens, and bathrooms
– Protection for rapid transit, vehicular, utility, and pedestrian tunnel

Pros:
– Cost-effective, flexible, and dependable waterproofing protection against
– Quick and easy to apply, increasing on-site productivity
– Special membrane-to-membrane adhesion and overlap guideline for secure,
– Compatible with various substrates (concrete, masonry, wood, insulated wall

Cons:
– Application requires clean, dry, smooth, and well-prepared surfaces,
– Parge-coat needed for masonry walls, which adds steps prior to priming and

SikaProof® Membrane (paste) | Liquid Applied Membrane

CETCO Waterproofing Products | Minerals Technologies Inc.

Product Details:
CETCO provides a range of waterproofing products for building materials, including bentonite-based waterproofing systems designed to prevent water ingress in below-grade and critical waterproofing applications.

Technical Parameters:
– Utilizes sodium bentonite, which swells upon contact with water to seal gaps
– Available in sheet and panel form for various construction scenarios
– Compatible with concrete surfaces in new and remedial construction
– Products are designed for positive side (external) and blindside waterproofing

Application Scenarios:
– Below-grade foundations and basements
– Tunnels and other civil engineering structures
– Plaza decks, green roofs, and planters
– Elevator pits and other water-prone structural details

Pros:
– Self-sealing capability for enhanced durability and long-term waterproofing
– Installs in a range of weather conditions and on green (freshly set) concrete
– Economical installation with minimal specialized equipment required
– Eco-friendly and non-toxic material composition

Cons:
– Bentonite-based membranes may require protection from prolonged exposure to
– Potential performance limitations in areas with chemical contamination or

Concrete Waterproofing – W. R. Meadows

Product Details:
W. R. MEADOWS offers a comprehensive line of concrete waterproofing and moisture control products including liquid-applied membranes, roll membranes, hot- and cold-applied systems, drainage and protection accessories, and specialized adhesives.

Notable products include MEADOW-PRUF CO-SPRAY (liquid-applied), HRM 714 (hot-applied rubberized asphalt), PRECON (composite sheet membrane for blindside/underslab), MEL-ROL and MEL-ROL LM (roll and liquid membranes), MEL-DEK (vehicular traffic waterproofing system), HYDRALASTIC 836 (cold-applied membrane), and a variety of protection and drainage accessories such as MEL-PRIME, MEL-DRAIN, PROTECTION COURSE, and TERMINATION BAR.

Technical Parameters:
– 100% solids (HRM 714) and solvent-free, low VOC options available (e.g.,
– Cures to form tough, seamless, elastomeric membranes with high resistance to
– Polymeric membranes feature nominal thicknesses (e.g., 56 mil for MEL-ROL roll
– Products available for both vertical and horizontal applications; suitable for

Application Scenarios:
– Below-grade vertical and horizontal waterproofing (basements, walls, underslab)
– Vehicular traffic structures such as bridges and parking decks (MEL-DEK)
– Plaza decks, planter boxes, parapets, and ICF (Insulating Concrete Forms)
– Projects requiring blindside waterproofing where access to the positive side is

Pros:
– Full system approach ensures comprehensive moisture control with matched
– Broad range of chemistries and formats (hot/cold-applied, roll, liquid) for
– Suitable for both new construction and restoration, including use with green
– Long track record and industry reputation for reliability and high quality

Cons:
– Some products require specific application methods or equipment (e.g., co-spray
– Specialized systems may require trained contractors for installation
– Comprehensive system may increase upfront material costs compared to basic
– Limited information provided regarding environmental or sustainability data

VOLTEX Waterproofing Membranes | Minerals Technologies Inc.

Product Details:
VOLTEX is a highly effective waterproofing membrane comprised of two high-strength geotextiles encapsulating a layer of sodium bentonite, designed for waterproofing below-ground structures. When the geotextiles are needle-punched together, they form a strong, composite material that swells when hydrated to form a low-permeability barrier to water.

Technical Parameters:
– Consists of two non-woven and woven geotextiles encapsulating sodium bentonite
– Thickness: approximately 6 mm (0.24 inches)
– Swelling of bentonite forms a low-permeability barrier (<1×10^-9 cm/sec
– Roll size: 1.22 m x 5.13 m (4 ft x 16.8 ft)

Application Scenarios:
– Basement waterproofing
– Below-grade structures such as foundations and tunnels
– Retaining walls and earth-covered roofs
– Blindside and under slab applications

Pros:
– Self-sealing properties that heal after minor punctures or tears
– Quick and easy installation, no need for torching or adhesives
– Can be installed in all weather conditions and on green or damp concrete
– Mechanically bonded system reduces risk of delamination

Cons:
– Requires proper overlap and detailing to prevent water ingress at seams
– Exposure to contaminated groundwater (e.g., high-salt concentration) may affect

Waterproofing Membrane and Sheet Waterproofing Systems by Sika

Product Details:
Sika offers waterproofing membrane and sheet waterproofing systems designed for use in construction and various industries, emphasizing building protection and durability in challenging environments.

Application Scenarios:
– Below grade waterproofing for foundations and basements
– Balcony and plaza deck protection
– Roofing and building envelope waterproofing
– Concrete protection and repair

Pros:
– Comprehensive solutions covering several construction scenarios
– Designed for robust waterproofing and durability
– Suitable for both new construction and repairs

Nexacoatings | | Advanced Liquid Membranes

Product Details:
Nexa Coatings offers industrial and protective coatings designed for corrosion protection, surface finishing, and enhanced durability for a range of environments including marine, infrastructure, and industrial applications.

Technical Parameters:
– High performance anti-corrosive properties
– Long-lasting durability in harsh environmental conditions
– Various formulations such as epoxy, polyurethane, and zinc-rich coatings
– Fast curing times and strong adhesion to diverse substrates

Application Scenarios:
– Marine structures and vessels
– Industrial plants and factories
– Bridges and civil infrastructure
– Oil and gas pipelines and assets

Pros:
– Strong resistance to corrosion and chemical exposure
– Versatility across multiple industry sectors and application types
– Enhanced lifespan and reduced maintenance requirements

Cons:
– Professional application may be required for optimal results
– Potential higher initial cost compared to some basic coatings

Concrete Waterproofing Coatings – Concrete Waterproofing Membrane

Product Details:
Concrete waterproofing coatings and membranes designed to protect concrete surfaces from water intrusion.

Waterproofing Systems, Membranes & Products Supplier – Sika

Product Details:
Sika Malaysia supplies a wide range of waterproofing systems, membranes, and related products for construction protection and enhancement, including solutions for roofing, basements, concrete protection, and specialty coatings.

Application Scenarios:
– Waterproofing for basements and roofs
– Concrete protection in construction projects
– Roof system installations and repairs
– Chemical-resistant coating applications

Pros:
– Comprehensive range of construction protection products
– Solutions tailored for varied sectors such as data centers, bridges, highways,
– Availability of technical documentation and software tools to assist in proper

Comparison Table

Frequently Asked Questions (FAQs)

How can I identify reliable membrane waterproofing suppliers or manufacturers?
Look for suppliers with strong industry experience, positive client testimonials, and recognized certifications. Check if they perform quality inspections and offer warranties. You can also request samples to assess product quality and ask about their previous projects or partners for added reassurance.

What factors should I consider when comparing different suppliers?
Consider product quality, pricing, delivery times, customization options, and after-sales support. Evaluate their technical expertise and ability to provide suitable waterproofing solutions for your needs. Reliable communication and transparency are also key indicators of a good supplier.

Is it important to visit the supplier’s factory before making a decision?
Visiting the factory helps verify the supplier’s capabilities, quality control processes, and production scale. If a visit isn’t possible, requesting a virtual tour or a live video call can provide similar insights and help build trust in your potential partner.

What certifications should a trustworthy membrane waterproofing manufacturer have?
Look for certifications such as ISO 9001 (quality management), ISO 14001 (environmental management), and relevant industry-specific marks. These indicate that the manufacturer adheres to international standards and consistently produces high-quality products.

How can I ensure the supplier offers suitable after-sales support and technical assistance?
Discuss warranty, installation guidance, and ongoing technical support before making a purchase. Ask for references from previous buyers to confirm their satisfaction with the supplier’s support and responsiveness to issues post-purchase.